High accuracy, less than 0.1% error over a dynamic range of 3000 : 1 Exactly measure the real power in the positive orientation and negative orientation, calculate the energy in the same orientation A PGA in the current channel allows using small value shunt and burden resistance The low frequency outputs F1 and F2 can directly drive electromechanic.
BL6503E Single Phase Energy Meter IC DESCRIPTION High accuracy, less than 0.1% error over a dynamic range of 3000 : 1 Exactly measure the real power in the positive orientation and negative orientation, calculate the energy in the same orientation A PGA in the current channel allows using small value shunt and burden resistance The low frequency outputs F1 and F2 can directly drive electromechanical counters and two phase stepper motors and the high frequency output CF, supplies instantaneous real power, is intended for calibration and communications The logic outputs REVP can be.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BL6503 |
SHANGHAI BELLING |
Single Phase Energy Meter IC | |
2 | BL6501 |
Shanghai Belling |
Single Phase Energy Meter IC | |
3 | BL6501A |
SHANGHAI BELLING |
Single Phase Energy Meter IC | |
4 | BL6502 |
SHANGHAI BELLING |
Integrated Oscillator Single Phase Current Sampling Energy Metering IC | |
5 | BL6511 |
SHANGHAI BELLING |
Three-phase Active Energy Meter | |
6 | BL6512 |
SHANGHAI BELLING |
With phase-phase metering chip output | |
7 | BL6513 |
SHANGHAI BELLING |
Three-phase Active Energy Meter | |
8 | BL6513C |
SHANGHAI BELLING |
Three-phase four-wire wide-range meter | |
9 | BL6514 |
SHANGHAI BELLING |
Phase active power metering chip | |
10 | BL652 |
Laird |
enable OEMs to add single-mode Bluetooth | |
11 | BL652-SA |
Laird |
enable OEMs to add single-mode Bluetooth | |
12 | BL652-SC |
Laird |
enable OEMs to add single-mode Bluetooth |