The BGSA148MN10 is a single-pole four throws (SP4T) antenna tuning switch optimized for RF applications up to 7.125GHz. The BGSA148MN10 is made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behaviour. This last feature is of great value to reduce an.
Ultra low RON resistance of 0.8 Ω in ON state
Low COFF capacitance of 155 fF in OFF state
RF operating voltage handling 45 V in OFF state
MIPI RFFE 2.1 control interface
Support both 1.8V and 1.2V VIO operation
External USID_SEL pin enabling 4 default USID addresses
Small form factor 0.95 mm x 1.3 mm (MSL1, 260 °C per JEDEC J-STD-020)
Potential applications
Impedance, antenna and Inductance tuning
Tunable filters
Description
The BGSA148MN10 is a single-pole four throws (SP4T) antenna tuning switch optimized for RF applications up to 7.125GHz. The BGSA148MN10 is made of 4 low .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BGSA142MN12 |
Infineon |
High RF Voltage SP4T Switch | |
2 | BGSA143GL10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
3 | BGSA143ML10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
4 | BGSA144ML10 |
Infineon |
Ultra high RF voltage antenna tuning SP4T | |
5 | BGSA147ML10 |
Infineon |
Ultra Low Resistance Antenna Tuning SP4T | |
6 | BGSA14GN10 |
Infineon |
Single Pole Quad Throw RF antenna tuning switch | |
7 | BGSA14M2N10 |
Infineon |
Ultra small antenna tuning SP4T | |
8 | BGSA11GN10 |
Infineon |
Dual Single Pole Single Throw Antenna Tuning Switch | |
9 | BGSA12GN10 |
Infineon |
Antenna Tuning Switch | |
10 | BGSA12UGL8 |
Infineon |
Low Resistance SPDT Antenna Aperture Switch | |
11 | BGSA200ML9 |
Infineon |
Two throws low resistance antenna tuning switch | |
12 | BGSA20UGL8 |
Infineon |
High RF Voltage Dual SPST Antenna Aperture Shunt Switch |