The BGSA144ML10 is a single-pole four throws (SP4T) Antenna Tuning switch optimized for RF applications up to 7.125 GHz. The BGSA144ML10 is made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behavior. This last feature is of great value to reduce an.
Low RON resistance of 1.74 Ω at each RF port in ON state
Ultra low COFF capacitance of 89 fF in OFF state
Individually controlled reflective open or short to ground OFF ports
to eliminate unwanted antenna resonances
High RF operating voltage handling 80 V in OFF state
MIPI RFFE 2.1 compliant control interface
External USID_SEL pin enabling 4 default USID addresses
Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020)
Potential applications
Impedance, Antenna and Inductance Tuning
Tunable Filters
Description
The BGSA144ML10 is a single-pole four throws (SP4T) An.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BGSA142MN12 |
Infineon |
High RF Voltage SP4T Switch | |
2 | BGSA143GL10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
3 | BGSA143ML10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
4 | BGSA147ML10 |
Infineon |
Ultra Low Resistance Antenna Tuning SP4T | |
5 | BGSA148MN10 |
Infineon |
Ultra small antenna tuning SP4T | |
6 | BGSA14GN10 |
Infineon |
Single Pole Quad Throw RF antenna tuning switch | |
7 | BGSA14M2N10 |
Infineon |
Ultra small antenna tuning SP4T | |
8 | BGSA11GN10 |
Infineon |
Dual Single Pole Single Throw Antenna Tuning Switch | |
9 | BGSA12GN10 |
Infineon |
Antenna Tuning Switch | |
10 | BGSA12UGL8 |
Infineon |
Low Resistance SPDT Antenna Aperture Switch | |
11 | BGSA200ML9 |
Infineon |
Two throws low resistance antenna tuning switch | |
12 | BGSA20UGL8 |
Infineon |
High RF Voltage Dual SPST Antenna Aperture Shunt Switch |