The BGSA142MN12 is a versatile direct mapping Single-Pole Quad Thro (SP4T) RF switch optimized for low COFF as well as low RON enabling applications up to 6.0 GHz. Including a MIPI RFFE digital control interface, all the throw states can be programmed in the same RFFE command enabling SP4T, SP3T, SPDT along with SPST topology for a better flexibility in RF F.
Designed for high linearity and high RF voltage tuning applications
Multiple selectable switch configurations:
Each throw directly and independently controlled
Low RON resistance of 1.75 Ω at each port in ON state
Low COFF capacitance of 110 fF at each port in OFF state
High RF operating voltage of 72 V at RFx and 67 V at RFC in OFF state
Low harmonic generation
MIPI 2.0 RFFE control interface
4 USID addresses enabled by external condition at USID_sel pin
and SCLK/SDATA swap mode
Supply voltage range: 1.65 to 1.95 V
No RF parameter change within supply voltage range
Small.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BGSA143GL10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
2 | BGSA143ML10 |
Infineon |
Low Resistance Antenna Tuning Switch | |
3 | BGSA144ML10 |
Infineon |
Ultra high RF voltage antenna tuning SP4T | |
4 | BGSA147ML10 |
Infineon |
Ultra Low Resistance Antenna Tuning SP4T | |
5 | BGSA148MN10 |
Infineon |
Ultra small antenna tuning SP4T | |
6 | BGSA14GN10 |
Infineon |
Single Pole Quad Throw RF antenna tuning switch | |
7 | BGSA14M2N10 |
Infineon |
Ultra small antenna tuning SP4T | |
8 | BGSA11GN10 |
Infineon |
Dual Single Pole Single Throw Antenna Tuning Switch | |
9 | BGSA12GN10 |
Infineon |
Antenna Tuning Switch | |
10 | BGSA12UGL8 |
Infineon |
Low Resistance SPDT Antenna Aperture Switch | |
11 | BGSA200ML9 |
Infineon |
Two throws low resistance antenna tuning switch | |
12 | BGSA20UGL8 |
Infineon |
High RF Voltage Dual SPST Antenna Aperture Shunt Switch |