The AP22913 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical RDS(on) of 54mΩ at 5V (X1WLB0909-4), allowing increased load current handling capacity with a low forward voltage drop. The turn-on slew rate of the device is controlled internally. VIN and VOUT a.
• Wide Input Voltage Range: 1.4V to 5.5V
• Low On-Resistance (X1-WLB0909-4):
92mΩ Typical @1.5V
76mΩ Typical @1.8V
56mΩ Typical @3.3V
54mΩ Typical @5.0V
• High DC Current Capability up to 2A
• Truly Reverse Current Block (TRCB)
• Discharging Resistor on VOUT When Disabled
• Ultra-Low Quiescent Current 1µA
• Active-High Control Pin
Minimum 1.1V VIH of ON
• ESD Protection:
Human Body Model: 2kV
Charged Device Model: 1kV
• Package:
SX1-WLB0909-4 with Backside Laminate
Standard Green SOT26
0.9mm x 0.9mm, 0.5mm Ball Pitch
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP22916 |
DIODES |
ULTRA-LOW LEAKAGE LOAD SWITCH | |
2 | AP22908 |
DIODES |
1.5A SINGLE SLEW RATE CONTROLLED LOAD SWITCH | |
3 | AP22966 |
Diodes |
5V DUAL CHANNEL PROGRAMMABLE LOAD SWITCH | |
4 | AP2201 |
BCD Semiconductor |
RF ULDO REGULATOR | |
5 | AP2201 |
Chipown |
PFM Control Step-Up Switching Regulator | |
6 | AP2202 |
BCD Semiconductor |
RF ULDO REGULATOR | |
7 | AP2202 |
Diodes |
150mA RF ULDO REGULATOR | |
8 | AP2203 |
BCD Semiconductor |
RF ULDO REGULATOR | |
9 | AP2204 |
Diodes |
150mA ULDO REGULATOR | |
10 | AP2204 |
BCD Semiconductor |
WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR | |
11 | AP2205 |
Diodes |
200mA ULDO REGULATOR | |
12 | AP2210 |
BCD Semiconductor |
RF ULDO REGULATOR |