The AP22908 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical low RDS(ON) of 28mΩ at 3.6V, allowing increased load current handling capacity with a low forward voltage drop. The turn-on slew rate of the device is controlled internally to avoid inrush current.
Wide Input Voltage Range: 1.08V to 3.6V
Low On-Resistance:
69mΩ Typical @1.2V
41mΩ Typical @1.8V
33mΩ Typical @2.5V
28mΩ Typical @3.6V
High DC Current Capability up to 1.5A
Quick Discharging by Output Discharge Resistance
Ultra-Low Quiescent Current 0.05µA
Active-High Control Pin
Minimum 0.9V VIH of ON
ESD Protection:
Human Body Model: 2kV
Charged Device Model: 1kV
Package:
X1-WLB0909-4 with Backside Laminate
U-WLB0909-4 with Backside Laminate
0.87mm 0.87mm, 0.5mm Ball Pitch
Standard Green SOT26
Solder Ball Material: SnAgCu
Totally Lead-Free and Full.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP22913 |
Diodes |
SINGLE SLEW RATE CONTROLLED LOAD SWITCH | |
2 | AP22916 |
DIODES |
ULTRA-LOW LEAKAGE LOAD SWITCH | |
3 | AP22966 |
Diodes |
5V DUAL CHANNEL PROGRAMMABLE LOAD SWITCH | |
4 | AP2201 |
BCD Semiconductor |
RF ULDO REGULATOR | |
5 | AP2201 |
Chipown |
PFM Control Step-Up Switching Regulator | |
6 | AP2202 |
BCD Semiconductor |
RF ULDO REGULATOR | |
7 | AP2202 |
Diodes |
150mA RF ULDO REGULATOR | |
8 | AP2203 |
BCD Semiconductor |
RF ULDO REGULATOR | |
9 | AP2204 |
Diodes |
150mA ULDO REGULATOR | |
10 | AP2204 |
BCD Semiconductor |
WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR | |
11 | AP2205 |
Diodes |
200mA ULDO REGULATOR | |
12 | AP2210 |
BCD Semiconductor |
RF ULDO REGULATOR |