The AP2210 is a 300mA ULDO regulator which provides very low noise, ultra-low dropout voltage (typically 250mV at 300mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz). This device is used in battery powered applications, such as handsets and PDAs; and in noise sensitive applications, such as RF elec.
individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, overcurrent protection, overtemperature protection, and reversed current protection.
The AP2210 has 2.5V, 2.8V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0V, and ADJ versions.
The AP2210 is available in the space saving SOT-23-3 and SOT-23-5 packages.
Pin Assignments
(Top View) VIN 3
1
2
GND
VOUT
SOT-23-3
(Top View)
VIN 1 GND 2
EN 3
5 VOUT 4 BYP/ADJ
SOT-23-5
Features
• Up to 300mA Output Current
• Excellent ESR Stability
• Low Standby Current
• Low Dropout Voltage: VDROP = 250mV at 300mA.
Features Data Sheet AP2210 The AP2210 is a 300mA ULDO regulator which provides very low noise, ultra low dropout volt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP2213 |
BCD Semiconductor |
LOW NOISE LDO REGULATOR | |
2 | AP221448 |
DIODES |
2.5A LOAD SWITCH | |
3 | AP2218 |
BCD Semiconductor |
LOW DROPOUT LINEAR REGULATOR | |
4 | AP2201 |
BCD Semiconductor |
RF ULDO REGULATOR | |
5 | AP2201 |
Chipown |
PFM Control Step-Up Switching Regulator | |
6 | AP2202 |
BCD Semiconductor |
RF ULDO REGULATOR | |
7 | AP2202 |
Diodes |
150mA RF ULDO REGULATOR | |
8 | AP2203 |
BCD Semiconductor |
RF ULDO REGULATOR | |
9 | AP2204 |
Diodes |
150mA ULDO REGULATOR | |
10 | AP2204 |
BCD Semiconductor |
WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR | |
11 | AP2205 |
Diodes |
200mA ULDO REGULATOR | |
12 | AP22615 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION SWITCH |