The Am29BDS128H/Am29BDS640H is a 128 or 64 Mbit, 1.8 Volt-only, simultaneous Read/Write, Burst Mode Flash memory device, organized as 8,388,608 or 4,194,304 words of 16 bits each. This device uses a single VCC of 1.65 to 1.95 V to read, program, and erase the memory array. A 12.0-volt VHH on ACC may be used for faster program performance if desired. The devi.
■ Handshaking feature — Provides host system with minimum possible latency by monitoring RDY — Reduced Wait-state handshaking option further reduces initial access cycles required for burst accesses beginning on even addresses
■
■ Hardware reset input (RESET#) — Hardware method to reset the device for reading array data WP# input — Write protect (WP#) function allows protection of the four highest and four lowest 4 kWord boot sectors, regardless of sector protect status Persistent Sector Protection — A command sector protection method to lock combinations of individual sectors and sector group.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AM29BDS320G |
AMD |
Burst Mode Flash Memory | |
2 | AM29BDS323D |
Advanced Micro Devices |
32 Megabit (2 M x 16-Bit) CMOS 1.8 Volt-only Simultaneous Read/Write/ Burst Mode Flash Memory | |
3 | AM29BDS640G |
AMD |
Burst Mode Flash Memory | |
4 | AM29BDS640H |
AMD |
(AM29BDS128H / AM29BDS640H) Burst Mode Flash Memory | |
5 | AM29BDS643D |
AMD |
Burst Mode Flash Memory | |
6 | AM29BDS643G |
AMD |
Burst Mode Flash Memory | |
7 | AM29BDD160G |
AMD |
Simultaneous Read/Write Flash Memory | |
8 | AM29BL162C |
AMD |
Burst Mode Flash Memory | |
9 | AM29BL802C |
AMD |
Burst Mode Flash Memory | |
10 | AM290 |
National Semiconductor |
Monolithic N-Channel Junction FET Switches | |
11 | AM2901 |
Advanced Micro Devices |
4-Bit Bipolar MicroProcessor Slice | |
12 | AM2901A |
Advanced Micro Devices |
4-Bit Bipolar MicroProcessor Slice |