The ADN4690E/ADN4692E/ADN4694E/ADN4695E are multipoint, low voltage differential signaling (M-LVDS) transceivers (driver and receiver pairs) that can operate at up to 100 Mbps (50 MHz). Slew rate control is implemented on the driver outputs. The receivers detect the bus state with a differential input of as little as 50 mV over a common-mode voltage range of.
Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs) Switching rate: 100 Mbps (50 MHz) Supported bus loads: 30 Ω to 55 Ω Choice of 2 receiver types Type 1 (ADN4690E/ADN4692E): hysteresis of 25 mV Type 2 (ADN4694E/ADN4695E): threshold offset of 100 mV for open-circuit and bus-idle fail-safe Conforms to TIA/EIA-899 standard for M-LVDS Glitch-free power-up/power-down on M-LVDS bus Controlled transition times on driver output Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise Driver outputs high-Z when disabled or powered off E.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADN4690E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
2 | ADN4691E |
Analog Devices |
High Speed M-LVDS Transceivers | |
3 | ADN4692E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
4 | ADN4693E |
Analog Devices |
High Speed M-LVDS Transceivers | |
5 | ADN4693E-1 |
Analog Devices |
High Speed M-LVDS Transceiver | |
6 | ADN4695E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
7 | ADN4696E |
Analog Devices |
High Speed M-LVDS Transceivers | |
8 | ADN4697E |
Analog Devices |
High Speed M-LVDS Transceivers | |
9 | ADN4600 |
Analog Devices |
Asynchronous Crosspoint Switch | |
10 | ADN4604 |
Analog Devices |
Digital Crosspoint Switch | |
11 | ADN4605 |
Analog Devices |
4.25 Gbps 40 x 40 Digital Crosspoint Switch | |
12 | ADN4612 |
Analog Devices |
12 x 12 Digital Crosspoint Switch |