The ADN4693E-1 is a multipoint, low voltage differential signaling (M-LVDS) transceiver (driver and receiver pair) that can operate at up to 200 Mbps (100 MHz) nonreturn to zero (NRZ). The receiver detects the bus state with a differential input of as little as ±50 mV over the common-mode voltage range of the device. Electrostatic discharge (ESD) protection .
► Full-duplex M-LVDS transceiver (driver and receiver pair)
► Switching rate: 200 Mbps (100 MHz)
► Type 1 receiver with input hysteresis of 25 mV
► Compatible with the TIA/EIA-899 standard for M-LVDS
► Glitch free power-up/power-down on M-LVDS bus
► Controlled transition times on driver output
► Common-mode range: −1 V to +3.4 V, allowing communication
with 2 V of ground noise
► Driver outputs high-Z when disabled or powered off
► Enhanced ESD protection on bus pins
► ≥±15 kV HBM, air discharge
► ≥±8 kV HBM, contact discharge
► ≥±10 kV IEC 61000-4-2, air discharge
► ≥±8 kV IEC 61000-4-2, conta.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADN4693E |
Analog Devices |
High Speed M-LVDS Transceivers | |
2 | ADN4690E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
3 | ADN4691E |
Analog Devices |
High Speed M-LVDS Transceivers | |
4 | ADN4692E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
5 | ADN4694E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
6 | ADN4695E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
7 | ADN4696E |
Analog Devices |
High Speed M-LVDS Transceivers | |
8 | ADN4697E |
Analog Devices |
High Speed M-LVDS Transceivers | |
9 | ADN4600 |
Analog Devices |
Asynchronous Crosspoint Switch | |
10 | ADN4604 |
Analog Devices |
Digital Crosspoint Switch | |
11 | ADN4605 |
Analog Devices |
4.25 Gbps 40 x 40 Digital Crosspoint Switch | |
12 | ADN4612 |
Analog Devices |
12 x 12 Digital Crosspoint Switch |