Data Sheet 3.3 V, 200 Mbps, Half- and Full-Duplex, High Speed M-LVDS Transceivers ADN4691E/ADN4693E/ADN4696E/ADN4697E FEATURES Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs) Switching rate: 200 Mbps (100 MHz) Supported bus loads: 30 Ω to 55 Ω Choice of 2 receiver types Type 1 (ADN4691E/ADN4693E): hysteresis of 2.
Multipoint LVDS transceivers (low voltage differential signaling driver and receiver pairs) Switching rate: 200 Mbps (100 MHz) Supported bus loads: 30 Ω to 55 Ω Choice of 2 receiver types Type 1 (ADN4691E/ADN4693E): hysteresis of 25 mV Type 2 (ADN4696E/ADN4697E): threshold offset of 100 mV for open-circuit and bus-idle fail-safe Conforms to TIA/EIA-899 standard for M-LVDS Glitch free power-up/power-down on M-LVDS bus Controlled transition times on driver output Common-mode range: −1 V to +3.4 V, allowing communication with 2 V of ground noise Driver outputs high-Z when disabled or powered off .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADN4690E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
2 | ADN4692E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
3 | ADN4693E |
Analog Devices |
High Speed M-LVDS Transceivers | |
4 | ADN4693E-1 |
Analog Devices |
High Speed M-LVDS Transceiver | |
5 | ADN4694E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
6 | ADN4695E |
Analog Devices |
(ADN4690E - ADN4695E) High Speed M-LVDS Transceivers | |
7 | ADN4696E |
Analog Devices |
High Speed M-LVDS Transceivers | |
8 | ADN4697E |
Analog Devices |
High Speed M-LVDS Transceivers | |
9 | ADN4600 |
Analog Devices |
Asynchronous Crosspoint Switch | |
10 | ADN4604 |
Analog Devices |
Digital Crosspoint Switch | |
11 | ADN4605 |
Analog Devices |
4.25 Gbps 40 x 40 Digital Crosspoint Switch | |
12 | ADN4612 |
Analog Devices |
12 x 12 Digital Crosspoint Switch |