These devices contain two independent J-K positiveedge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup-time requirements are transferred to the outputs on the positive-going .
• Wide operating voltage range of 2 V to 6 V
• Low input current of 1 μA max
• High-current outputs drive up to 10 LSTTL loads
• Low power consumption, 40-μA max ICC
• Typical tpd = 12 ns
• ±4-mA output drive at 5 V
2 Description
These devices contain two independent J-K positiveedge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup-time requirements are transferred to the outputs on the positive-going edge of t.
The M54HCxxx and M54HCTxxx series is composed of CMOS functions specifically designed to meet the radiation requirements.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 54HC10 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
2 | 54HC10 |
Texas Instruments |
Triple 3-Input NAND Gates | |
3 | 54HC11 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
4 | 54HC11 |
Texas Instruments |
Triple 3-Input AND Gate | |
5 | 54HC112 |
Texas Instruments |
Dual J-K Negative-Edge-Triggered Flip-Flops | |
6 | 54HC123 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
7 | 54HC125 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
8 | 54HC125 |
Texas Instruments |
Quadruple Buffers | |
9 | 54HC132 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
10 | 54HC132 |
Texas Instruments |
Quadruple 2-Input NAND Gates | |
11 | 54HC133 |
National Semiconductor |
13-Input NAND Gate | |
12 | 54HC138 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic |