The Texas Instruments single-cell bq27320 battery fuel gauge requires very minimal configuration and system microcontroller firmware development, leading to quick system bring-up. The bq27320 uses the Compensated End-of-Discharge Voltage (CEDV) gas gauging algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of.
•1 Battery Fuel Gauge For System-/Pack-Side Configuration
• Compensated End-of-Discharge Voltage (CEDV) Gauging Technology
– Adjusts for Battery Aging, Self-Discharge, Temperature, and Rate Changes
– Reports Remaining Capacity, State-of-Charge (SOC), and Time-to-Empty with Smoothing Filter
– Battery State-of-Health Estimation
– Supports Embedded or Removable Packs from 100-mAhr to 14,500-mAhr Capacity
– Accommodates Pack Swapping with up to Four Separate Battery Profiles
– Supports a Raw Coulomb Counter To Provide Delta Capacity Information
• Microcontroller Peripheral Supports:
– SDQ Communic.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | bq27350 |
Texas Instruments |
Single Cell Li-Ion/Li-Polymer Battery Manager | |
2 | bq27000 |
Texas Instruments |
SINGLE CELL Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
3 | bq27010 |
Texas Instruments |
Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
4 | bq27200 |
Texas Instruments |
SINGLE CELL Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
5 | bq27210 |
Texas Instruments |
Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
6 | bq27220 |
Texas Instruments |
Single-Cell CEDV Fuel Gauge | |
7 | bq27411-G1 |
Texas Instruments |
Single-Cell Li-Ion Battery Fuel Gauge | |
8 | bq27421-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
9 | bq27425-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
10 | bq27425-G2 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
11 | BQ27426 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
12 | bq27441-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge |