The Texas Instruments BQ27426 battery fuel gauge is a single-cell gauge that requires minimal userconfiguration and system microcontroller firmware development, leading to quick system bring-up. Three chemistry profiles are preprogrammed to enable minimum user-configuration, and to help manage customer inventory across projects with different battery chemi.
• Single-cell Li-ion battery fuel gauge
– Resides on system board
– Supports embedded or removable batteries
– Powers directly from the battery with integrated
LDO
– Supports a low-value external sense resistor
(10 mΩ)
• Ultra low 9 μA operating current when the load is
below 10 mA, set by Sleep Current threshold.
• Battery fuel gauging based on patented
Impedance Track™ technology
– Provides three selectable preprogrammed profiles for 4.2-V, 4.35-V, and 4.4-V cells
– Reports remaining capacity and state-of-charge (SOC) with smoothing filter
– Adjusts automatically for battery aging, selfdisch.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | bq27421-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
2 | bq27425-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
3 | bq27425-G2 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
4 | bq27411-G1 |
Texas Instruments |
Single-Cell Li-Ion Battery Fuel Gauge | |
5 | bq27441-G1 |
Texas Instruments |
System-Side Impedance Track Fuel Gauge | |
6 | bq27000 |
Texas Instruments |
SINGLE CELL Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
7 | bq27010 |
Texas Instruments |
Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
8 | bq27200 |
Texas Instruments |
SINGLE CELL Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
9 | bq27210 |
Texas Instruments |
Li-Ion AND Li-Pol BATTERY GAS GAUGE | |
10 | bq27220 |
Texas Instruments |
Single-Cell CEDV Fuel Gauge | |
11 | bq27320 |
Texas Instruments |
Single-Cell CEDV Fuel Gauge | |
12 | bq27350 |
Texas Instruments |
Single Cell Li-Ion/Li-Polymer Battery Manager |