The X40620 combines several functions into one device. The first is a dual voltage monitoring, power-on reset control, watchdog timer and 64Kbit serial BLOCK DIAGRAM WP Write Control Logic HV Generation Timing and Control Watchdog Timer Reset Reset & Watchdog Timebase Power on and Low Voltage Reset Generation V2FAIL + - RESET SCL SDA Command Decode and Co.
• Dual Voltage Detection and Reset Assertion —Three standard reset threshold settings. (3.1V/ 2.6V, 3.1V/1.7V, 2.9V/2.3V) —Adjust low voltage reset threshold voltages using special programming sequence —RESET signal valid down to VCC=1V
• Watchdog Timer (150ms)
• Power On Reset (150ms)
• Low Power CMOS —10µA typical standby current, watchdog on —400µA typical standby current, watchdog off
• 64kbit 2-Wire Serial EEPROM —1MHz serial interface speed —64-byte page write mode —Self-timed write cycle —5ms write cycle time (typical)
• 2.5 to 3.7V Power Supply Operation
• 8-Lead TSSOP package DESCRIPT.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | X40626 |
Xicor |
Dual Voltage CPU Supervisor with 64K Serial EEPROM | |
2 | X40626 |
Renesas |
8K x 8 Bit Dual Voltage CPU Supervisor | |
3 | X40010 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
4 | X40010 |
Renesas |
Dual Voltage Monitor | |
5 | X40011 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
6 | X40011 |
Renesas |
Dual Voltage Monitor | |
7 | X40014 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
8 | X40014 |
Renesas |
Dual Voltage Monitor | |
9 | X40015 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
10 | X40015 |
Renesas |
Dual Voltage Monitor | |
11 | X40020 |
Intersil Corporation |
(X40020 / X40021) Dual Voltage Monitor | |
12 | X40021 |
Intersil Corporation |
(X40020 / X40021) Dual Voltage Monitor |