The X40020 combines power-on reset control, watchdog timer, supply voltage supervision, and secondary supervision, and manual reset, in one package. This combination lowers system cost, reduces board space requirements, and increases reliability. Applying voltage to VCC activates the power-on reset circuit which holds RESET/RESET active for a period of time..
• Dual voltage detection and reset assertion —Three standard reset threshold settings (4.6V/2.9V, 4.6V/2.6V, 2.9V/1.6V) —VTRIP2 programmable down to 0.9V —Adjust low voltage reset threshold voltages using special programming sequence —Reset signal valid to VCC = 1V —Monitor two voltages or detect power fail
• Battery switch backup
• VOUT: 5mA to 50mA from VCC; 250µA from VBATT
• Fault detection register
• Selectable power-on reset timeout (0.05s, 0.2s, 0.4s, 0.8s)
• Selectable watchdog timer interval (25ms, 200ms, 1.4s, off)
• Debounced manual reset input
• Low power CMOS —25µA typical standby.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | X40021 |
Intersil Corporation |
(X40020 / X40021) Dual Voltage Monitor | |
2 | X40010 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
3 | X40010 |
Renesas |
Dual Voltage Monitor | |
4 | X40011 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
5 | X40011 |
Renesas |
Dual Voltage Monitor | |
6 | X40014 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
7 | X40014 |
Renesas |
Dual Voltage Monitor | |
8 | X40015 |
Xicor |
Dual Voltage Monitor with Integrated CPU Supervisor | |
9 | X40015 |
Renesas |
Dual Voltage Monitor | |
10 | X4003 |
Xicor |
CPU Supervisor | |
11 | X4003 |
Renesas |
CPU Supervisor | |
12 | X4003 |
Intersil Corporation |
(X4003 / X4005) CPU Supervisor |