The WT6148/ WT6160 is a microcontroller for digital controlled monitor. It contains an 8-bit CPU, 48K /60K bytes ROM, 1056 bytes RAM, 14 PWMs, parallel I/Os, SYNC signal processor, timer, DDC1/2B interface, master/slave I2C interface, 6-bit A/D converter and watch-dog timer. FEATURES • 8-bit 6502 compatible CPU with 6MHz operating frequency • WT6148 : 48K b.
• 8-bit 6502 compatible CPU with 6MHz operating frequency
• WT6148 : 48K bytes ROM, WT6160 : 60K bytes ROM, ,1024 bytes SRAM+32 bytes bit addressable SRAM
• 12MHz crystal oscillator
• 14 channels 8-bit PWM outputs
• Sync signal processor with H+V separation, H/V frequency counter, H/V polarity detection/control and clamp pulse output
• Six free-running sync signal outputs (Horizontal frequency up to 106KHz 85Hz@1600x1200)
• Self-test pattern
• DDC1/2B module for EDID1.3, EDID2.0 and Enhance EDID
• Fast mode master/slave I2C interface (up to 400KHz)
• Watch-dog timer
• Maximum 28 programmable I.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | WT6116 |
ETC |
microcontroller for digital controlled monitor | |
2 | WT6124 |
ETC |
microcontroller for digital controlled monitor | |
3 | WT6132 |
ETC |
microcontroller for digital controlled monitor | |
4 | WT6148 |
Weitrend |
(WT6148 / WT6160) Digital Monitor Controller | |
5 | WT61P4 |
Weltrend |
Embedded Micro Controller | |
6 | WT61P6 |
Weltrend |
Embedded Micro-Controller | |
7 | WT61P8 |
Weltrend |
Flat Panel Display Control Sub-MCU | |
8 | WT6002 |
W2 Technology |
Active Diode Driver IC | |
9 | WT6003 |
W2 Technology |
Active Diode Driver IC | |
10 | WT6014 |
ETC |
Digital Monitor Controller | |
11 | WT6016 |
ETC |
Digital Monitor Controller | |
12 | WT6018 |
ETC |
Digital Monitor Controller |