The UTC UCD4066 is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high. It has a much lower “ON” resistance, and “ON” resistance is relatively c.
* 15V Digital or ±7.5V Peak-to-Peak Switching
* 85-Ω Typical On-State Resistance for 15V Operation
* High noise immunity 0.45 VDD (typ.)
* Matched “ON” resistance ∆RON=5Ω (typ.) over 15V signal input
* High degree linearity 0.1% distortion (typ.)
@ fIS=1kHz, VIS=5VP-P, VDD-VSS=5V, RL=10kΩ
* Extremely low “OFF” 0.1nA (typ.) switch leakage: @ VDD-VSS=10V, TA=25°C
* Extremely high control input impedance 1012Ω (typ.)
* Frequency response, switch “ON” 40 MHz (typ.)
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
UCD4066L-D14-T
UCD4066G-D14-T
Package DIP-14
DIP-14
Packing Tube.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCD4060B |
Unisonic Technologies |
CMOS 14-Stage Ripple-Carry Binary Counter/Divider/Oscillator | |
2 | UCD4001B |
Unisonic Technologies |
QUAD 2-INPUT NOR BUFFERED B-SERIES GATE | |
3 | UCD4002B |
Unisonic Technologies |
CMOS NOR Gates | |
4 | UCD40106B |
Unisonic Technologies |
HEX SCHMITT TRIGGERS | |
5 | UCD4011B |
Unisonic Technologies |
QUAD 2-INPUT NAND BUFFERED B-SERIES GATE | |
6 | UCD4014B |
Unisonic Technologies |
CMOS 8-STAGE STATIC SHIFT REGISTERS | |
7 | UCD4015 |
Unisonic Technologies |
CMOS Dual 4-Stage Static Shift Register | |
8 | UCD4015B |
Unisonic Technologies |
CMOS Dual 4-Stage Static Shift Register | |
9 | UCD4021B |
Unisonic Technologies |
CMOS 8-STAGE STATIC SHIFT REGISTERS | |
10 | UCD4023B |
Unisonic Technologies |
TRIPLE 3-INPUT NAND GATE | |
11 | UCD4028B |
UTC |
BCD-TO-DECIMAL DECODER / BINARY-TO-OCTAL DECODER | |
12 | UCD4043B |
UTC |
CMOS QUAD 3-STATE NOR R/S LATCHES |