The UCC5340 is a dual voltage, micropower, IrDA (Infrared Data Association) compliant receiver. It’s high gain photodiode input amplifier incorporates a unique limiting circuit which permits operation over a very wide dynamic input range. The integrated bandpass filter includes additional limiting circuitry, further reducing device recovery time requirements.
• Micro Power, 90 A Typical Operating Current
• 3.3V or 5V Operation
• 8-Pin SOIC Package
• 1 cm to 1 Meter IrDA Link
Compliance
• Directly Interfaces to IrDA Compatible UARTS and Super I/O Chips
• Supports Data Rates from 2400 to 115.2KBits/Second
• CMOS/TTL Compatible Output
• ASK Modulation Compatible
• Drop in compatible with Irvine
Sensor SIR2
BLOCK DIAGRAM
UCC5340
PRELIMINARY
DESCRIPTION The UCC5340 is a dual voltage, micropower, IrDA (Infrared Data Association) compliant receiver. It’s high gain photodiode input amplifier incorporates a unique limiting circuit which permits operation o.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCC5304 |
Texas Instruments |
Sink Single-Channel Reinforced Isolation Gate Driver | |
2 | UCC5310 |
Texas Instruments |
Single-Channel Isolated Gate Driver | |
3 | UCC5320 |
Texas Instruments |
Single-Channel Isolated Gate Driver | |
4 | UCC5350 |
Texas Instruments |
Single-Channel Isolated Gate Driver | |
5 | UCC5390 |
Texas Instruments |
Single-Channel Isolated Gate Driver | |
6 | UCC5606 |
ETCTI |
9-Line 3-5 Volt SCSI Active Terminator Reverse Disconnect (Rev. A) | |
7 | UCC5638 |
ETCTI |
Multimode SCSI 15 Line Terminator (Rev. B) | |
8 | UCC5640 |
ETCTI |
Low Voltage Differential (LVD) SCSI 9 Line Terminator (Rev. C) | |
9 | UCC5672 |
ETCTI |
Multimode (LVD/SE) SCSI 9 Line Terminator (Rev. B) | |
10 | UCC12040 |
Texas Instruments |
DC-DC Converter | |
11 | UCC12050 |
Texas Instruments |
DC-DC Converter | |
12 | UCC14341-Q1 |
Texas Instruments |
DC/DC Module |