UCC12040 is a DC/DC converter with 3-kVRMS basic isolation rating designed to provide efficient, isolated power to isolated circuits that require a bias supply with a well-regulated output voltage. The device integrates a transformer and DC/DC controller with a proprietary architecture to provide 500 mW (typical) of isolated power with high efficiency and lo.
2 Applications
•1 High-efficiency DC-DC converter with integrated transformer technology
• Meets CISPR32 Class B EMI limits without ferrite beads across entire load range on a 2-layer PCB
• Robust isolation barrier:
– Isolation rating: 3 kVRMS
– Surge capability: 8 kVPK
– Working voltage: 850 VRMS
– CMTI (typical): ±100 V/ns
• Output power (typical): 500-mW
• Regulated 5.0-V or 3.3-V output with selectable 400-mV headroom voltage to power an LDO
• Input voltage: 4.5 V to 5.5 V
• Short circuit recovery
• Thermal shutdown
• 16-pin wide-body SOIC package with > 8-mm creepage and clearance
• Ext.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCC12050 |
Texas Instruments |
DC-DC Converter | |
2 | UCC14341-Q1 |
Texas Instruments |
DC/DC Module | |
3 | UCC15701 |
Unitrode |
Advanced Voltage Mode Pulse Width Modulator | |
4 | UCC15702 |
Unitrode |
Advanced Voltage Mode Pulse Width Modulator | |
5 | UCC1580-1 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
6 | UCC1580-2 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
7 | UCC1580-3 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
8 | UCC1580-4 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
9 | UCC1581 |
Unitrode |
Micropower Voltage Mode PWM | |
10 | UCC1583 |
Unitrode |
(UCC1583 - UCC3583) Switch Mode Secondary Side Post Regulator | |
11 | UCC1800 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
12 | UCC1801 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers |