The UCC3583 is a synchronizable secondary side post regulator for precision regulation of the auxiliary outputs of multiple output power supplies. It contains a leading edge pulse width modulator, which generates the gate drive signal for a FET power switch connected in series with the rectifying diode. The turn-on of the power switch is delayed from the lea.
• Precision Secondary Side Post
Regulation for Multiple Output Power Supplies
• Useful for Both Single Ended and Center Tapped Secondary Circuits
• Ideal Replacement for Complex Magnetic Amplifier Regulated Circuits
• Leading Edge Modulation
• Does Not Require Gate Drive Transformer
• High Frequency (>500kHz) Operation
• Applicable for Wide Range of Output Voltages
• High Current Gate Driver (0.5A Sink/1.5A Source)
• Average Current Limiting Loop
DESCRIPTION
The UCC3583 is a synchronizable secondary side post regulator for precision regulation of the auxiliary outputs of multiple output power.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UCC1580-1 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
2 | UCC1580-2 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
3 | UCC1580-3 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
4 | UCC1580-4 |
Texas Instruments |
Single Ended Active Clamp/Reset PWM | |
5 | UCC1581 |
Unitrode |
Micropower Voltage Mode PWM | |
6 | UCC15701 |
Unitrode |
Advanced Voltage Mode Pulse Width Modulator | |
7 | UCC15702 |
Unitrode |
Advanced Voltage Mode Pulse Width Modulator | |
8 | UCC12040 |
Texas Instruments |
DC-DC Converter | |
9 | UCC12050 |
Texas Instruments |
DC-DC Converter | |
10 | UCC14341-Q1 |
Texas Instruments |
DC/DC Module | |
11 | UCC1800 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers | |
12 | UCC1801 |
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers |