TZA3030 - NXP

TZA3030 SDH/SONET STM1/OC3 optical receiver

plastic low profile quad flat package; 32 leads; body 5 × 5 × 1.4 mm naked die in waffle pack carriers; die dimensions 1.58 × 1.58 mm APPLICATIONS TZA3030 • Digital fibre optic receiver in short, medium and long haul optical telecommunications transmission systems or in high speed data networks • Wideband RF gain block. GENERAL DESCRIPTION The TZA3030 optical.

Features

• Low equivalent input noise, typically 1 pA/√Hz
• Wide dynamic range, typically 0.5 µA to 2 mA
• On-chip low-pass filter. The bandwidth can be varied between 90 and 150 MHz using an external resistor. Default value is 120 MHz.
• Differential transimpedance of 1.8 MΩ
• On-chip Automatic Gain Control (AGC)
• Positive Emitter Coupled Logic (PECL) or Current-Mode Logic (CML) compatible data outputs
• LOS (Loss Of Signal) detection
• LOS threshold level can be adjusted using a single external resistor
• On-chip DC offset compensation
• Single supply voltage from 3.0 to 5.5 V
• Bias voltage for PIN.