plastic quad flat package; 64 leads (lead length 1.6 mm); body 14 × 14 × 2.7 mm GENERAL DESCRIPTION TZA3005H The TZA3005H SDH/SONET transceiver chip is a fully integrated serialization/deserialization STM1/OC3 (155.52 Mbits/s) and STM4/OC12 (622.08 Mbits/s) interface device. It performs all necessary serial-to-parallel and parallel-to-serial functions in ac.
• Supports STM1/OC3 (155.52 Mbits/s) and STM4/OC12 (622.08 Mbits/s)
• Supports reference clock frequencies of 19.44, 38.88, 51.84 and 77.76 MHz
• Meets Bellcore, ANSI and ITU-T specifications
• Meets ITU jitter specification typically to a factor of 2.5
• Integral high-frequency PLL for clock generation
• Interface to TTL logic
• Low jitter PECL (Positive Emitter Coupled Logic) interface
• 4 or 8-bit STM1/OC3 TTL data path
• 4 or 8-bit STM4/OC12 TTL data path
• No external filter components required
• QFP64 package
• Diagnostic and line loopback modes
• Lock detect
• LOS (Loss of Signal) input.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TZA3000 |
NXP |
SDH/SONET STM4/OC12 optical receiver | |
2 | TZA3001AHL |
NXP |
SDH/SONET STM4/OC12 laser drivers | |
3 | TZA3001BHL |
NXP |
SDH/SONET STM4/OC12 laser drivers | |
4 | TZA3004HL |
NXP |
SDH/SONET data and clock recovery unit STM1/4 OC3/12 | |
5 | TZA3013A |
NXP |
SDH/SONET STM16/OC48 transimpedance amplifier | |
6 | TZA3013B |
NXP |
SDH/SONET STM16/OC48 transimpedance amplifier | |
7 | TZA3014 |
NXP |
2.5 Gbits/s postamplifier with level detector | |
8 | TZA3015HW |
NXP |
30 Mbit/s to 3.2 Gbit/s A-rate 4-bit fibre optic transceiver | |
9 | TZA3019 |
NXP |
2.5 Gbits/s dual postamplifier with level detectors and 2 x 2 switch | |
10 | TZA3023 |
NXP |
SDH/SONET STM4/OC12 transimpedance amplifier | |
11 | TZA3023 |
NXP |
SDH/SONET STM1/OC3 and STM4/OC12 transceiver | |
12 | TZA3026 |
NXP |
SDH/SONET STM4/OC12 transimpedance amplifer |