The TZA3019 is a low gain postamplifier multiplexer with a dual RSSI and/or LOS detector that is designed for use in critical signal path control applications, such as loop-through, redundant channel switching or Wavelength Division Multiplexing (WDM). The signal path is unregistered, so no clock is required for the data inputs. The signal path is fully diff.
• Dual postamplifier
• Single 3.3 V power supply
• Wideband operation from 50 kHz to 2.5 GHz (typical value)
• Fully differential
• Channels are delay matched
• On-chip DC-offset compensations without external capacitor
• Interfacing with positive or negative supplied logic
• Switching possibility between channels
• Positive Emitter Coupled Logic (PECL) or Current-Mode Logic (CML) compatible data outputs adjustable from 200 to 800 mV (p-p) single-ended
• Power-down capability for unused outputs and detectors
• Rise and fall times 80 ps (typical value)
• Possibility to invert the output of each.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TZA3013A |
NXP |
SDH/SONET STM16/OC48 transimpedance amplifier | |
2 | TZA3013B |
NXP |
SDH/SONET STM16/OC48 transimpedance amplifier | |
3 | TZA3014 |
NXP |
2.5 Gbits/s postamplifier with level detector | |
4 | TZA3015HW |
NXP |
30 Mbit/s to 3.2 Gbit/s A-rate 4-bit fibre optic transceiver | |
5 | TZA3000 |
NXP |
SDH/SONET STM4/OC12 optical receiver | |
6 | TZA3001AHL |
NXP |
SDH/SONET STM4/OC12 laser drivers | |
7 | TZA3001BHL |
NXP |
SDH/SONET STM4/OC12 laser drivers | |
8 | TZA3004HL |
NXP |
SDH/SONET data and clock recovery unit STM1/4 OC3/12 | |
9 | TZA3005H |
NXP |
SDH/SONET STM1/OC3 and STM4/OC12 transceiver | |
10 | TZA3023 |
NXP |
SDH/SONET STM4/OC12 transimpedance amplifier | |
11 | TZA3023 |
NXP |
SDH/SONET STM1/OC3 and STM4/OC12 transceiver | |
12 | TZA3026 |
NXP |
SDH/SONET STM4/OC12 transimpedance amplifer |