The TPT710xx device is an isolated CAN transceiver that meets the ISO11898 High-speed CAN (Controller Area Network) physical layer standard. The device is designed to be applied in CAN FD networks up to 5 Mbps and to enhance timing margin and higher data rates in long and high-loading networks. As the design, the device features cross-wire, overvoltage, and .
• Meet ISO11898 Standard
• Support CAN FD and Data Rates up to 5 Mbps
• Typical Loop Delay: 110 ns
• 5-V Power Supply, 2.25-V to 5.5-V IO Interface
• Receiver Common-Mode Input Voltage: ±30 V
• Bus Fault Protection: ±42 V
• Up to 5-kV RMS Isolation Rating (WSOP)
• ±200-kV/μs typ Static CMTI, ±150-kV/μs typ Dynamic
CMTI
• Junction Temperatures from −40°C to 150°C
• SMP8 and Wide-SOP (WSOP8, WSOP16)
• BUS pin ESD Protection (between Bus pins and
GNDB)
– ±15-kV IEC 61000-4-2 Contact Discharge
• Safety-Related Certifications:
– VDE Certification according to DIN VDE V 0884-17
(IEC60747-17)
– 5000-.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPT71044 |
3PEAK |
Isolated CAN Transceiver | |
2 | TPT72616 |
3PEAK |
Enhanced High Performance Bidirectional I2C Isolator | |
3 | TPT72617 |
3PEAK |
Enhanced High Performance Bidirectional I2C Isolator | |
4 | TPT7487 |
3PEAK |
Isolated Full- and Half-Duplex RS485 Transceiver | |
5 | TPT7488 |
3PEAK |
Isolated Full- and Half-Duplex RS485 Transceiver | |
6 | TPT75176H |
3PEAK |
RS-485 Transceivers | |
7 | TPT7710 |
3PEAK |
1-Channel Enhanced High-Performance Digital Isolator | |
8 | TPT0472S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
9 | TPT0572S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
10 | TPT1042Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
11 | TPT1042VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
12 | TPT1043 |
3PEAK |
Low-Power Fault Protected High-Speed CAN FD Transceiver |