The TPT29548A is a 1:8 bidirectional translating I2C switch. The SCL/SDA upstream pair fans out to eight downstream channels. Any single SCn/SDn channel or combination of channels can be selected, determined by the programmable control register. If one of the downstream I2C buses is stuck in a low state, then an active-low reset (̅R̅̅E̅̅S̅̅E̅̅T̅) input helps.
Bidirectional Translator of 1:8 I2C Switch
Active-Low Reset Input
Three address terminals, allowing up to 8 devices
on the I2C Bus
Operating Power-Supply Voltage Range of 2.3 V
to 5.5 V
Allows Voltage-Level Translation Between 2.5 V,
3.3 V, and 5 V Buses
Support Standard Mode and Fast Mode I2C
Devices,0 to 400-kHz Clock Frequency
Low RON Switches
Latch-Up performance exceeds 200 mA per JESD
78
ESD Protection Exceeds JESD 22
− 3.5 kV Human-Body Model − 1.5 kV Charged-Device Model
Applications
Servers/Storages
Routers (Telecom Switching Equipment)
Factory Automation
Pro.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPT29546 |
3PEAK |
4-channel I2C Switch | |
2 | TPT29306 |
3PEAK |
Dual Bidirectional I2C Bus and SMBus Voltage-Level Translator | |
3 | TPT29617A |
3PEAK |
Dual Channel Bidirectional I2C Bus Level Shift and Repeater | |
4 | TPT0472S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
5 | TPT0572S |
TOPPOWER |
3W 1.5KVDC Isolated Triple Output DC/DC Converters | |
6 | TPT1042Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
7 | TPT1042VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
8 | TPT1043 |
3PEAK |
Low-Power Fault Protected High-Speed CAN FD Transceiver | |
9 | TPT1051Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
10 | TPT1051VQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
11 | TPT1145NQ |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver | |
12 | TPT1145Q |
3PEAK |
Automotive Fault Protected High-Speed CAN FD Transceiver |