The TPIC1021A is the Local Interconnect Network (LIN) physical interface, which integrates the serial transceiver with wake-up and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed, in-vehicle networks using data rates between 2.4 kbps and 20 kbps. The LIN protocol output data stream on TXD is converted by the T.
• LIN Physical Layer Specification Revision 2.0 Compliant and Conforms to SAEJ2602 Recommended Practice for LIN
• LIN Bus Speed up to 20-kbps LIN Specified Maximum
• Sleep Mode: Ultra-Low Current Consumption, Allows Wake-Up Events From LIN Bus, Wake-Up Input (External Switch), or Host MCU
• High-Speed Receive Capable
• ESD Protection to ±12 kV (Human-Body Model)
on LIN Pin
• LIN Pin Handles Voltage From
–40 V to 40 V
• Survives Transient Damage in Automotive
Environment (ISO 7637)
• Extended Operation With Supply From 7 V to
27 V DC (LIN Specification 7 V to 18 V)
• Interfaces to MCU With 5-V .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPIC1021 |
Texas Instruments |
LIN Physical Interface | |
2 | TPIC1301 |
Texas Instruments |
3-Half H-Bridge Gate-Protected Power DMOS Array | |
3 | TPIC1310 |
Texas Instruments |
3-Half H-Bridge Gate-Protected Power DMOS Array | |
4 | TPIC1321L |
Texas Instruments |
3-Half H-Bridge Gate-Protected Logic-Level Power DMOS Array | |
5 | TPIC1501A |
Texas Instruments |
QUAD AND HEX POWER DMOS ARRAY | |
6 | TPIC0107B |
Texas Instruments |
PWM Control Intelligent H-Bridge | |
7 | TPIC0108B |
Texas Instruments |
PWM Control Intelligent H-Bridge | |
8 | TPIC0298 |
Texas Instruments |
Dual Full-H Driver | |
9 | TPIC2010 |
Texas Instruments |
Serial I/F Controlled 9-Channel Motor-Driver | |
10 | TPIC2030 |
Texas Instruments |
Serial I/F Controlled 7-Channel Motor-Driver | |
11 | TPIC2040 |
Texas Instruments |
Serial I/F Controlled 7-Channel Motor-Driver | |
12 | TPIC2050 |
Texas Instruments |
Serial I/F Controlled 9-Channel Motor-Driver |