The TPIC1021 is the LIN (Local Interconnect Network) physical interface, which integrates the serial transceiver with wake up and protection features. The LIN bus is a single wire, bi-directional bus typically used for low-speed in-vehicle networks using baud rates between 2.4 kbps and 20 kbps. The LIN bus has two logical values: the dominant state (voltage .
•1 LIN Physical Layer Specification Revision 2.0 compliant. Conforms to SAEJ2602 Recommended Practice for LIN
• LIN Bus Speed up to 20 kbps
• ESD Protection to 12 kV (Human Body Model) on
LIN Pin
• LIN Pin Handles Voltage from
–40 V to 40 V
• Survives Transient Damage in Automotive
Environment (ISO 7637)
• Operation with Supply from 7-V to 27-V DC
• Two Operation Modes: Normal and Low-Power
(Sleep) Mode
• Low Current Consumption in Low Power Mode
• Wake-Up Available from LIN Bus, Wake-Up Input
(External Switch) or Host MCU
• Interfaces to MCU with 5-V or 3.3-V I/O Pins
• Dominant State Timeout.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPIC1021A-Q1 |
Texas Instruments |
LIN Physical Interface | |
2 | TPIC1301 |
Texas Instruments |
3-Half H-Bridge Gate-Protected Power DMOS Array | |
3 | TPIC1310 |
Texas Instruments |
3-Half H-Bridge Gate-Protected Power DMOS Array | |
4 | TPIC1321L |
Texas Instruments |
3-Half H-Bridge Gate-Protected Logic-Level Power DMOS Array | |
5 | TPIC1501A |
Texas Instruments |
QUAD AND HEX POWER DMOS ARRAY | |
6 | TPIC0107B |
Texas Instruments |
PWM Control Intelligent H-Bridge | |
7 | TPIC0108B |
Texas Instruments |
PWM Control Intelligent H-Bridge | |
8 | TPIC0298 |
Texas Instruments |
Dual Full-H Driver | |
9 | TPIC2010 |
Texas Instruments |
Serial I/F Controlled 9-Channel Motor-Driver | |
10 | TPIC2030 |
Texas Instruments |
Serial I/F Controlled 7-Channel Motor-Driver | |
11 | TPIC2040 |
Texas Instruments |
Serial I/F Controlled 7-Channel Motor-Driver | |
12 | TPIC2050 |
Texas Instruments |
Serial I/F Controlled 9-Channel Motor-Driver |