Pin No. 1 2 3 4 5, 6 7, 8 Symbol Pin Description SOURCE1 IN1 SOURCE2 IN2 DRAIN2 DRAIN1 Source pin 1 Input pin 1 This pin is connected to a pull-down resistor internally, so that even when input wiring is open-circuited, output can never be turned on inadvertently. Source pin 2 Input pin 2 This pin is connected to a pull-down resistor internally, so that.
• Two built-in power IC chips with a new structure combining a control block and a vertical power MOSFET (L2-π-MOS) on each chip.
• Can directly drive a power load from a CMOS or TTL logic.
Weight: 0.08 g (typ.)
• Built-in protection circuits against overvoltage (active clamp), overtemperature (thermal shutdown), and overcurrent (current limiter).
• Low Drain-Source ON-resistance: RDS (ON) = 0.4 Ω (max) (@VIN = 5 V, ID = 1 A, Tch = 25°C)
• Low Leakage Current: IDSS = 10 μA (max) (@VIN = 0 V, VDS = 20 V, Tch = 25°C)
• Low Input Current: IIN = 300 μA (max) (@VIN = 5 V, Tch = -40~110°C)
• .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TPD1030F |
Toshiba Semiconductor |
2-IN-1 Low-Side Switch | |
2 | TPD1033F |
Toshiba Semiconductor |
High-side Power Switch | |
3 | TPD1034F |
Toshiba Semiconductor |
High-side Power Switch | |
4 | TPD1036F |
Toshiba Semiconductor |
2-IN-1 Low-Side Power Switch | |
5 | TPD1037BS |
Toshiba Semiconductor |
Low-Side Switch | |
6 | TPD1038F |
Toshiba Semiconductor |
Lamp Drivers High-side Power Switch | |
7 | TPD1039F |
Toshiba |
Low-Side Power Switch | |
8 | TPD1008SA |
Toshiba Semiconductor |
High-side Power Switch | |
9 | TPD1011S |
Toshiba Semiconductor |
High-side Power Switch | |
10 | TPD1018F |
Toshiba Semiconductor |
HIGH SIDE POWER SWITCH | |
11 | TPD1024S |
Toshiba Semiconductor |
Silicon Monolithic Power MOS | |
12 | TPD1028BS |
Toshiba Semiconductor |
Silicon Monolithic Power MOS |