The family of the amplifier are single/dual/quad chopper-stabilized zero-drift operational amplifiers optimized for single or dual supply operation from 1.8 V to 5.5 V and ±0.9 V to ±2.75 V. TP555X features very low input offset voltage and low noise with no 1/f noise corner down to 0.1 Hz. The TP555X is designed to have ultra-low offset voltage and offset t.
Supply Voltage: 1.8 V to 5.5 V
Low Offset Voltage: 5 μV (max)
Zero Drift: 0.05 µV/°C (max)
No 1/f Noise Corner Down to 0.1Hz
− Input Noise Voltage: 15 nV/√Hz at 1 kHz − 0.1 Hz to 10 Hz Voltage Noise: 350 nVPP
Slew Rate: 2.5 V/μs
Bandwidth: 3.5 MHz
Low Supply Current: 550 μA per Amplifier
Low Input Bias Current: 50 pA Typical
Rail-to-Rail Output Voltage Range
High gain, CMRR, PSRR: 130 dB
7 kV HBM ESD Rating
−40°C to 125°C Operation Range
Applications
Medical Instrumentation
Temperature Measurements
Precision current sensing
Precision Low Drift, Low Frequency ADC.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TP5551 |
3Peak |
RRIO Op-amps | |
2 | TP5552 |
3Peak |
RRIO Op-amps | |
3 | TP5510 |
National Semiconductor |
Full Duplex Analog Front End for Consumer Applications | |
4 | TP5510 |
ETCTI |
TP5510 Full Duplex Analog Front End (AFE) for Consumer Applications (Rev. A) | |
5 | TP5531 |
3Peak |
Zero Drift Op-amps | |
6 | TP5532 |
3Peak |
Zero Drift Op-amps | |
7 | TP5534 |
3Peak |
Zero Drift Op-amps | |
8 | TP5591 |
3Peak |
Zero Drift Op-amps | |
9 | TP5592 |
3Peak |
Zero Drift Op-amps | |
10 | TP5594 |
3Peak |
Zero Drift Op-amps | |
11 | TP5.0SMDJ10A |
UN Semiconductor |
Surface Mount Transient Voltage Suppressors | |
12 | TP5.0SMDJ10A |
ANOVA |
Surface Mount Transient Voltage Suppressors |