The 3PEAK TP5531/2/4 low-power chopper stabilized operational amplifiers provide input offset voltage correction for very low offset and offset drift over time and temperature. The devices operate with a single supply voltage as low as 1.8V, while drawing 34μA per amplifier of quiescent current with a .
LOW OFFSET VOLTAGE: 10 μV (Max)
ZERO DRIFT: 0.008 µV/°C
0.1Hz to 10Hz Noise: 1.1 µVPP
Low Supply Current: 34µA per Amplifier
Bandwidth: 350 kHz
Slew Rate: 0.16 V/μs
High Gain, 130 dB High CMRR and PSRR
Rail-to-rail Input and Output Swing
–40°C to 125°C Operation Range
Small Packages: SC70 and SOT23 (TP5531)
Applications
Transducer Amplifier
Bidirectional Current Sense
DC Offset Correction
Temperature Measurement
Remote Located Sensors
Battery-Powered Instruments
Electronic Weigh Scales
Pin Configuration (Top View)
TP5531 / TP5532 / TP5534
1.8V, 34μA, RRIO, Z.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TP5531 |
3Peak |
Zero Drift Op-amps | |
2 | TP5534 |
3Peak |
Zero Drift Op-amps | |
3 | TP5510 |
National Semiconductor |
Full Duplex Analog Front End for Consumer Applications | |
4 | TP5510 |
ETCTI |
TP5510 Full Duplex Analog Front End (AFE) for Consumer Applications (Rev. A) | |
5 | TP5551 |
3Peak |
RRIO Op-amps | |
6 | TP5552 |
3Peak |
RRIO Op-amps | |
7 | TP5554 |
3Peak |
RRIO Op-amps | |
8 | TP5591 |
3Peak |
Zero Drift Op-amps | |
9 | TP5592 |
3Peak |
Zero Drift Op-amps | |
10 | TP5594 |
3Peak |
Zero Drift Op-amps | |
11 | TP5.0SMDJ10A |
UN Semiconductor |
Surface Mount Transient Voltage Suppressors | |
12 | TP5.0SMDJ10A |
ANOVA |
Surface Mount Transient Voltage Suppressors |