The LITIX™ Basic TLD1314EL is a three channel high side driver IC with integrated output stages. It is designed to control LEDs with a current up to 120 mA. In typical automotive applications the device is capable to drive i.e. 3 red LEDs per chain (total 9 LEDs) with a current up to 60 mA, which is limited by thermal cooling aspects. The output current is c.
• 3 Channel device with integrated output stages (current sources), optimized to drive LEDs with output
current up to 120 mA per channel
• Low current consumption
• PWM-operation supported via VS-pin
• Output current adjustable via external low power resistor and possibility to connect PTC resistor for LED
protection during over temperature conditions
• Reverse polarity protection and overload protection
• Undervoltage detection
• Open load and short circuit to GND diagnosis
• Wide temperature range: -40°C < Tj < 150°C
• PG-SSOP-14 package with exposed heatslug Description The LITIX™ Basic TLD.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TLD1310 |
Infineon |
3 Channel High Side Current Source | |
2 | TLD1310EL |
Infineon |
3 Channel High Side Current Source | |
3 | TLD1311EL |
Infineon |
3 Channel High Side Current Source | |
4 | TLD1312EL |
Infineon |
3 Channel High Side Current Source | |
5 | TLD1313EL |
Infineon |
Basic LED Driver | |
6 | TLD1315EL |
Infineon |
3 Channel High Side Current Source | |
7 | TLD1326EL |
Infineon |
3 Channel High Side Current Source | |
8 | TLD1120EL |
Infineon |
1 Channel High Side Current Source | |
9 | TLD1121EL |
Infineon |
Basic LED Driver | |
10 | TLD1124EL |
Infineon |
Basic LED Driver | |
11 | TLD1125EL |
Infineon |
Basic LED Driver | |
12 | TLD1211SJ |
Infineon |
Basic LED Driver |