The LITIXTM Basic TLD1312EL is a three channel high side driver IC with integrated output stages. It is designed to control LEDs with a current up to 120 mA. In typical automotive applications the device is capable to drive i.e. 3 red LEDs per chain (total 9 LEDs) with a current up to 60mA, which is limited by thermal cooling aspects. The output current is c.
• 3 Channel device with integrated output stages (current sources), optimized to drive LEDs
• Output current up to 120mA per channel
• Low current consumption in sleep mode
• PWM-operation supported via VS- and EN-pin
• Integrated PWM dimming engine to provide two LED brightness
levels without external logic (e.g. µC)
• Output current adjustable via external low power resistor and
possibility to connect PTC resistor for LED protection during over temperature conditions
• Reverse polarity protection
• Overload protection
• Undervoltage detection
• Wide temperature range: -40 °C < Tj < 150 °C
• .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TLD1310 |
Infineon |
3 Channel High Side Current Source | |
2 | TLD1310EL |
Infineon |
3 Channel High Side Current Source | |
3 | TLD1311EL |
Infineon |
3 Channel High Side Current Source | |
4 | TLD1313EL |
Infineon |
Basic LED Driver | |
5 | TLD1314EL |
Infineon |
Basic LED Driver | |
6 | TLD1315EL |
Infineon |
3 Channel High Side Current Source | |
7 | TLD1326EL |
Infineon |
3 Channel High Side Current Source | |
8 | TLD1120EL |
Infineon |
1 Channel High Side Current Source | |
9 | TLD1121EL |
Infineon |
Basic LED Driver | |
10 | TLD1124EL |
Infineon |
Basic LED Driver | |
11 | TLD1125EL |
Infineon |
Basic LED Driver | |
12 | TLD1211SJ |
Infineon |
Basic LED Driver |