plastic DIL-bent-SIL power package; 17 leads (lead length 12 mm) GENERAL DESCRIPTION TDA8580 The TDA8580 is a stereo bridge-tied load (BTL) or a quad single-ended amplifier that operates over a wide supply voltage range from 8 to 28 V. This makes it suitable for many applications, such as car radios, television and home-sound systems. Because of an interna.
General
• Operating voltage from 8 to 28 V
• Low distortion
• Few external components, fixed gain
• High output power
• Can be used as a stereo amplifier in bridge-tied load (BTL) or quad single-ended (SE) amplifiers
• Single-ended mode without loudspeaker capacitor
• Mute and standby mode with one- or two-pin operation
• Diagnostic information for Dynamic Distortion Detector (DDD), high temperature (145 °C) and short-circuit
• No switch on/off plops when switching between ‘standby’ to ‘mute’ and from ‘mute’ to ‘on’
• Low offset variation at outputs between ‘mute’ and ‘on’
• Fast mute on suppl.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8580J |
NXP |
Multi-purpose power amplifier | |
2 | TDA8581 |
NXP |
Multi-purpose high-gain power amplifier | |
3 | TDA8586 |
NXP |
Power amplifier with load detection and auto BTL/SE selection | |
4 | TDA8587J |
NXP |
4 x 25 W BTL power amplifier | |
5 | TDA8588AJ |
Philips |
Power Amplifier and Multiple Voltage Regulator | |
6 | TDA8588BJ |
Philips |
Power Amplifier and Multiple Voltage Regulator | |
7 | TDA8588J |
Philips |
Power Amplifier and Multiple Voltage Regulator | |
8 | TDA8589BJ |
Philips |
I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator | |
9 | TDA8589J |
NXP |
I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator | |
10 | TDA8589xJ |
NXP |
I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator | |
11 | TDA8501 |
NXP |
PAL/NTSC encoder | |
12 | TDA8505 |
NXP |
SECAM encoder |