(The following only describes one of the four channels, since all these channels are symmetrical.) 1. Standby Switch (pin 4) The power supply can be turned on or off via pin 4 (Stby). The threshold voltage of pin 4 is set at about 3 VBE (typ.). The power supply current is about 0.01 μA (typ.) in the standby state. VCC ON OFF Power 4 10 kΩ ≈ 2 VBE to Bias fil.
Features
• High output power
•
•
•
•
•
•
•
•
•
•
• POUT MAX (1) = 49 W (typ.) (VCC = 15.2 V, f = 1 kHz, JEITA max, RL = 4 Ω) POUT MAX (2) = 43W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) POUT (1) = 26 W (typ.) (VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω) POUT (2) = 23 W (typ.) (VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω) Weight: 7.7 g (typ.)
Low THD: 0.015% (typ.) (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω) Low noise: VNO = 160 μVrms (typ.) (VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 kHz, RL = 4 Ω) Standby switch (pin 4) Mute function (pin 22) Output DC offset detection and.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB2931HQ |
Toshiba |
4-Channel Audio Amplifier | |
2 | TB2932HQ |
Toshiba |
Maximum Power 49 W BTL X 4-ch Audio Power IC | |
3 | TB2934HQ |
Toshiba |
Maximum Power 41 W BTL x 4-ch Audio Power IC | |
4 | TB2938HQ |
Toshiba |
Maximum Power 49W BTL x 4-ch Audio Power IC | |
5 | TB2939HQ |
Toshiba |
45W X 4-ch BTL Audio Power IC | |
6 | TB2901H |
Toshiba Semiconductor |
Maximum Power 47 W BTL x 4-ch Audio Power-IC | |
7 | TB2901HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
8 | TB2902HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
9 | TB2903HQ |
Toshiba |
Maximum Power 47 W BTL x 4-Ch Audio Power-IC | |
10 | TB2904HQ |
Toshiba Semiconductor |
Maximum Power 43 W BTL 4-ch Audio Power-IC | |
11 | TB2905HQ |
Toshiba Semiconductor |
Low-Frequency Power Amplifier IC | |
12 | TB2906HQ |
Toshiba Semiconductor |
Maximum Power 43 W BTL x 4-ch Audio Power IC |