is made only on the single channel) 1. Voltage Gain Adjustment This IC has no NF (negative feedback) Pins. Therefore, the voltage gain can not be adjusted, but it makes the device a space and total costs saver. Amp. 2A Amp. 1 Input Amp. 2B Figure 1 Block Diagram The voltage gain of amp.1 : GV1 = 8dB The voltage gain of amp.2A, B : GV2 = 20dB The voltage .
• : High power output POUT MAX (1) = 43 W (typ.) P (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 39 W (typ.) (VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω) : POUT (1) = 26 W (typ.) (VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω) : POUT (2) = 23 W (typ.) (VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω) DataSheet4U.com
• Low distortion ratio: THD = 0.015% (typ.) (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω)
•
•
•
•
•
• Low noise: VNO = 180 µVrms (typ.) (VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 kHz, RL = 4 Ω) Built-in standby switch function (pin 4) Built-in muting function (pin .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB2901H |
Toshiba Semiconductor |
Maximum Power 47 W BTL x 4-ch Audio Power-IC | |
2 | TB2901HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
3 | TB2902HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
4 | TB2903HQ |
Toshiba |
Maximum Power 47 W BTL x 4-Ch Audio Power-IC | |
5 | TB2904HQ |
Toshiba Semiconductor |
Maximum Power 43 W BTL 4-ch Audio Power-IC | |
6 | TB2905HQ |
Toshiba Semiconductor |
Low-Frequency Power Amplifier IC | |
7 | TB2909FNG |
Toshiba |
Maximum Power 5W SEPP x 1ch Audio Power Amp IC | |
8 | TB2912HQ |
Toshiba Semiconductor |
Maximum Power 41 W BTL x 4-ch Audio Power IC | |
9 | TB2913HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
10 | TB2921AHQ |
Toshiba |
51W x 4-ch BTL Audio Power IC | |
11 | TB2921HQ |
Toshiba |
Maximum Power 50 W BTL X 4-ch Audio Power-IC | |
12 | TB2922HQ |
Toshiba Semiconductor |
Dual Audio Power Amplifier |