Document | DataSheet (527.94KB) |
is made only on the single channel) 1. Voltage Gain Adjustment This IC has no NF (negative feedback) Pins. Therefore, the voltage gain can not be adjusted, but it makes the device a space and total costs saver. Amp. 2A Amp. 1 Input www.DataSheet4U.com Amp. 2B Figure 1 Block Diagram The voltage gain of amp.1 : GV1 = 8dB The voltage gain of amp.2A, B : GV.
• : : : :
•
•
•
•
•
•
• High power output POUT (1)= 22 W (typ) (VCC = 18V, RL = 8 Ω, f = 1 kHz, THD = 10%) POUT (2)= 37W (typ) (VCC = 16V, RL = 4 Ω, f = 1 kHz, THD = 10%) POUT (3)= 46W (typ) (VCC = 26V, RL = 8 Ω, f = 1 kHz, THD = 10%) POUTMAX (1)= 72W (typ) (VCC = 26V, RL = 8 Ω, f = 1 kHz, Max Power) Low distortion ratio Low noise : THD=0.02% (typ) : Vno = 0.16 μVrms (typ) (VCC = 18V, RL = 8 Ω, Rg = 0 Ω, BW = 20 Hz~20 kHz)
Low outside parts Built-in standby switch function (pin 1) Built-in muting function (pin 6) Built-in various protection circuits: Thermal shut down, overvoltage, out to GND.
Distributor | Stock | Price | Buy |
---|
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB2921AHQ |
Toshiba |
51W x 4-ch BTL Audio Power IC | |
2 | TB2921HQ |
Toshiba |
Maximum Power 50 W BTL X 4-ch Audio Power-IC | |
3 | TB2923HQ |
Toshiba |
50 W X 4-ch BTL Audio Power-IC | |
4 | TB2924AFG |
Toshiba |
20W X 2-Channel Low Frequency Power Amplifier IC | |
5 | TB2924FG |
Toshiba Semiconductor |
2-channel (BTL) Low-Frequency Power Amplifier IC | |
6 | TB2926CHQ |
Toshiba |
49W x 4-ch BTL Audio Power-IC | |
7 | TB2926HQ |
Toshiba |
45W X 4-Channel BTL Audio Power IC | |
8 | TB2929AHQ |
Toshiba |
Maximum Power 47W BTL x 4-ch Audio Power-IC | |
9 | TB2929HQ |
Toshiba |
45W X 4-ch BTL Audio Power-IC | |
10 | TB2901H |
Toshiba Semiconductor |
Maximum Power 47 W BTL x 4-ch Audio Power-IC | |
11 | TB2901HQ |
Toshiba Semiconductor |
4-ch Audio Power IC | |
12 | TB2902HQ |
Toshiba Semiconductor |
4-ch Audio Power IC |