SiT1420B - SiTime

SiT1420B Active Resonator Drop-In Replacement

Pin Symbol 1 XIN/VDD VDD Power 2 GND Power 3 XOUT/CLK Output 4 GND Power Functionality Connect to µC GPIO pin XTAL1 set High via firmware[3] Electrical ground CLK output; connect to µC XTAL2 pin (refer to Figure 18 in Application Note section) Electrical GND Top View GND 4 3 XOUT/CLK XIN/VDD 1 2 GND Figure 1. Pin Assignments Notes: 3. A.

Features

◼ No load capacitors required
◼ No motional series resistance (ESR) compensation
◼ No negative resistance testing
◼ Guaranteed oscillator startup under all conditions
◼ One active resonator can drive up to two clock inputs
◼ All-inclusive frequency stability as low as ±20 ppm over extended temperature range (-55°C to 125°C)
◼ Fundamental frequencies between 1 MHz and 110 MHz accurate to 6 decimal places
◼ Supply voltage of 1.8 V or 2.5 V to 3.3 V
◼ Industry best G-sensitivity of 0.1 ppb/g
◼ Low power consumption of 3.5 mA typical at 1.8 V
◼ LVCMOS compatible output
◼ Industry-standard packages.