Ordering number : ENA0754A STK672-540 Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-540 is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • The motor speed can be controlled by the frequency of an external cloc.
• The motor speed can be controlled by the frequency of an external clock signal.
• 2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE pin (low or high).
• The phase is maintained even if the excitation mode is switched in the middle of operation.
• The direction of rotation can be changed by applying a high or low signal to the CWB pin used to select the direction
of rotation.
• Supports schmitt input for 2.5V high level input.
• Incorporating a current detection resistor (0.11Ω: resistor tolerance ±2%), motor current can be set using two exter.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | STK672-543-E |
ON Semiconductor |
2-phase Stepping Motor Driver | |
2 | STK672-520 |
ON Semiconductor |
2-phase Stepping Motor Driver | |
3 | STK672-532 |
ON Semiconductor |
2-phase Stepping Motor Driver | |
4 | STK672-010 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
5 | STK672-020 |
Sanyo Semicon Device |
Unipolar Fixed-Current Chopper | |
6 | STK672-040 |
Sanyo Semicon Device |
Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) | |
7 | STK672-050 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
8 | STK672-050-E |
Sanyo Semicon Device |
Stepping Motor Driver | |
9 | STK672-050-E |
ON Semiconductor |
Stepping Motor Driver | |
10 | STK672-060 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
11 | STK672-080 |
Sanyo Semicon Device |
Stepping Motor Driver (Sine Wave Drive) Output Current : 2.8 A (No Heat Sink) | |
12 | STK672-110 |
Sanyo Semicon Device |
Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A |