External Excitation Chopper Drive Block Description VCC1 IOFF ION Enable ØA (control signal) Current divider Vref A=1 L2 L1 Divider CR oscillator 800kHz 45kHz S – + D1 MOSFET AND Q Latch circuit R Noise filter Rs A13263 Driver Block Basic Circuit Structure Since this hybrid IC adopts an external excitation method, no external oscillator circuit is.
a significantly smaller package for easier mounting in end products.
• One of five drive types can be selected with the drive mode settings (M1, M2, and M3) —2 phase excitation drive —1-2 phase excitation drive —W1-2 phase excitation drive —2W1-2 phase excitation drive —4W1-2 phase excitation drive
• Phase retention even if excitation is switched.
• The MOI phase origin monitor pin is provided.
• The CLK input counter block can be selected to be one of the following by the high/low setting of the M3 input pin. —Rising edge only —Both rising and falling edges Note
*: Co.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | STK672-010 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
2 | STK672-020 |
Sanyo Semicon Device |
Unipolar Fixed-Current Chopper | |
3 | STK672-040 |
Sanyo Semicon Device |
Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) | |
4 | STK672-050 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
5 | STK672-050-E |
Sanyo Semicon Device |
Stepping Motor Driver | |
6 | STK672-050-E |
ON Semiconductor |
Stepping Motor Driver | |
7 | STK672-060 |
Sanyo Semicon Device |
Thick-Film Hybrid IC | |
8 | STK672-110 |
Sanyo Semicon Device |
Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A | |
9 | STK672-110-E |
ON Semiconductor |
Two-Phase Stepping Motor Driver | |
10 | STK672-120 |
Sanyo Semicon Device |
Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 2.4 A | |
11 | STK672-120-E |
ON Semiconductor |
Two-Phase Stepping Motor Driver | |
12 | STK672-120-SL-E |
ON Semiconductor |
2-phase Stepping Motor Driver |