ST7567 - Sitronix Technology

ST7567 65 x 132 Dot Matrix LCD Controller/Driver

Sitronix 1. INTRODUCTION ST7567 65 x 132 Dot Matrix LCD Controller/Driver ST7567 is a single-chip dot matrix LCD driver which incorporates LCD controller and common/segment drivers. ST7567 can be connected directly to a microprocessor with 8-bit parallel interface or 4-line serial interface (SPI-4). Display data sent from MPU is stored in the internal Disp.

Features

Single-chip LCD Controller & Driver On-chip Display Data RAM (DDRAM) Capacity: 65x132=8580 bits Directly display RAM pattern from DDRAM Selectable Display Duty (by SEL2 & SEL1) 1/65 duty : 65 common x 132 segment 1/55 duty : 55 common x 132 segment 1/49 duty : 49 common x 132 segment 1/33 duty : 33 common x 132 segment Microprocessor Interface Bidirectional 8-bit parallel interface supports: 8080-series and 6800-series MPU Serial interface (SPI-4) is also supported (write only) Abundant Functions Display ON/OFF, Normal/Reverse Display Mode, Set Display Start Line, Read IC Status, Set all Displ.