ST7565V - Sitronix Technology

ST7565V 65 x 132 Dot Matrix LCD Controller/Driver

The ST7565V is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565V contain 65x132 bits of display da.

Features

Direct display of RAM data through the display data RAM. RAM capacity : 65 x 132 = 8580 bits Display duty selectable by select pin 1/65 duty : 65 common x 132 segment 1/49 duty : 49 common x 132 segment 1/33 duty : 33 common x 132 segment 1/55 duty : 55 common x 132 segment 1/53 duty : 53 common x 132 segment High-speed 8-bit MPU interface (The chip can be connected directly to the both the 80x86 series MPUs and the 68000 series MPUs) /Serial interfaces are supported. Abundant command functions Display data Read/Write, display ON/OFF, Normal/ Reverse display mode, page address set, display sta.