The SP3203 provides a RS-232 transceiver solution for portable and hand-held applications such as palmtops, PDA's and cell phones. The SP3203 uses an internal high-efficiency, charge-pump that requires only 0.1µF capacitors during 3.3V operation. This charge pump and Sipex's driver architecture allow the SP3203 to deliver compliant RS-232 performance from a .
a 3-driver/2-receiver device, with a unique VL pin to program the TTL input and output logic levels to allow interoperation in mixed-logic voltage systems such as PDA's and cell phones. Receiver outputs will not exceed VL for VOH and transmitter input logic levels are scaled by the magnitude of the VL input. Rev. 6/25/03 SP3203 © Copyright 2003 Sipex Corporation 1 ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP320 |
Sipex |
Complete +5V-Only V.35 Interface with RS-232 V.28 Control Lines | |
2 | SP3203E |
Exar |
3V RS-232 Serial Transceiver | |
3 | SP3203E |
MaxLinear |
3V RS-232 Serial Transceiver | |
4 | SP3203E |
Sipex |
3V RS-232 Serial Transceiver | |
5 | SP3205 |
Littelfuse |
Unidirectional Diode | |
6 | SP3208 |
Littelfuse |
Bidirectional Discrete TVS | |
7 | SP32 |
Yue Fat |
SMD Power Inductors | |
8 | SP3213 |
Littelfuse |
Bidirectional Discrete TVS | |
9 | SP322 |
Sipex |
Programmable V.11/V.35 Transceiver | |
10 | SP3220 |
Sipex |
+3.0V to +5.5V RS-232 Driver/Receiver Pair | |
11 | SP3220B |
Sipex |
High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair | |
12 | SP3220E |
Exar |
+3.0V to +5.5V RS-232 Driver/Receiver Pair |