The SP320 is a complete V.35 interface transceiver offering 3 drivers and 3 receivers of V.35, and 4 drivers and 4 receivers of RS-232 (V.28). A Sipex patented charge pump allows +5V only low power operation. RS-232 drivers and receivers are specified to operate at 120kbps, all V.35 drivers and receivers operate up to 5Mbps. +5V 25, 33, 41, 62, 73 26 + 0.1µ.
500mV of hysteresis margin to minimize the effects of noisy transmission lines. The inputs also have a 5kΩ resistor to ground; in an open circuit situation the input of the receiver will be forced low, committing the output to a logic high state. The input resistance will maintain 3kΩ-7kΩ over a ±15V range. The maximum operating voltage range for the receiver is ±30V, under these conditions the input current to the receiver must be limited to less than 100mA. The RS-232 receivers can operate to beyond 120kbps. CHARGE PUMP The charge pump is a Sipex patented design (U.S. 5,306,954) and uses a u.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP32 |
Yue Fat |
SMD Power Inductors | |
2 | SP3203 |
Sipex |
3V RS-232 Serial Transceiver with Logic Selector | |
3 | SP3203E |
Exar |
3V RS-232 Serial Transceiver | |
4 | SP3203E |
MaxLinear |
3V RS-232 Serial Transceiver | |
5 | SP3203E |
Sipex |
3V RS-232 Serial Transceiver | |
6 | SP3205 |
Littelfuse |
Unidirectional Diode | |
7 | SP3208 |
Littelfuse |
Bidirectional Discrete TVS | |
8 | SP3213 |
Littelfuse |
Bidirectional Discrete TVS | |
9 | SP322 |
Sipex |
Programmable V.11/V.35 Transceiver | |
10 | SP3220 |
Sipex |
+3.0V to +5.5V RS-232 Driver/Receiver Pair | |
11 | SP3220B |
Sipex |
High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair | |
12 | SP3220E |
Exar |
+3.0V to +5.5V RS-232 Driver/Receiver Pair |