This family of 4, 8, and 16 differential line drivers implements the electrical characteristics of lowvoltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any .
•1 Four ('391), Eight ('389), or Sixteen ('387) Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard
• Designed for Signaling Rates Up to 630 Mbps With Very Low Radiation (EMI)
• Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load
• Propagation Delay Times Less Than 2.9 ns
• Output Skew Is Less Than 150 ps
• Part-to-Part Skew Is Less Than 1.5 ns
• 35-mW Total Power Dissipation in Each Driver
Operating at 200 MHz
• Driver Is High-Impedance When Disabled or With
VCC < 1.5 V
• SN65' Version Bus-Pin ESD Protection Exceeds
15 kV
• Packaged .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75LVDS390 |
Texas Instruments |
High-Speed Differential Line Receivers | |
2 | SN75LVDS31 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS | |
3 | SN75LVDS32 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE RECEIVERS | |
4 | SN75LVDS386 |
Texas Instruments |
High-Speed Differential Line Receivers | |
5 | SN75LVDS387 |
Texas Instruments |
High-Speed Differential Line Drivers | |
6 | SN75LVDS388A |
Texas Instruments |
High-Speed Differential Line Receivers | |
7 | SN75LVDS389 |
Texas Instruments |
High-Speed Differential Line Drivers | |
8 | SN75LVDS050 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
9 | SN75LVDS051 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
10 | SN75LVDS179 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
11 | SN75LVDS180 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
12 | SN75LVDS82 |
Texas Instruments |
Receiver |