The SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are differen- tial line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 155 Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100 Ω load and r.
difference between a transmitter and receiver. The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100 Ω characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. (Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application specific characteristics). The SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75LVDS051 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
2 | SN75LVDS179 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
3 | SN75LVDS180 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
4 | SN75LVDS31 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS | |
5 | SN75LVDS32 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE RECEIVERS | |
6 | SN75LVDS386 |
Texas Instruments |
High-Speed Differential Line Receivers | |
7 | SN75LVDS387 |
Texas Instruments |
High-Speed Differential Line Drivers | |
8 | SN75LVDS388A |
Texas Instruments |
High-Speed Differential Line Receivers | |
9 | SN75LVDS389 |
Texas Instruments |
High-Speed Differential Line Drivers | |
10 | SN75LVDS390 |
Texas Instruments |
High-Speed Differential Line Receivers | |
11 | SN75LVDS391 |
Texas Instruments |
High-Speed Differential Line Drivers | |
12 | SN75LVDS82 |
Texas Instruments |
Receiver |