The SN75154 is a monolithic low-power Schottky line receiver designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipment as defined by ANSI Standard EIA/TIA-232-E. Other applications are for relatively short, single-line, point-to-point data transmission and for level translators. Operation .
point-to-point data transmission and for level translators. Operation is normally from a single 5-V supply; however, a built-in option allows operation from a 12-V supply without the use of additional components. The output is compatible with most TTL circuits when either supply voltage is used. In normal operation, the threshold-control terminals are connected to the VCC1 terminal, even if power is being supplied via the alternate VCC2 terminal. This provides a wide hysteresis loop, which is the difference between the positive-going and negative-going threshold voltages. See typical character.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75154 |
Texas Instruments |
QUADRUPLE LINE RECEIVER | |
2 | SN75150 |
Texas Instruments |
DUAL LINE DRIVER | |
3 | SN751506 |
Texas Instruments |
DC Plasma Display Drivers | |
4 | SN751508 |
Texas Instruments |
DC Plasma Display Drivers | |
5 | SN75150P |
Texas Instruments |
DUAL LINE DRIVER | |
6 | SN75151 |
Texas Instruments |
Quad Differential Line Driver | |
7 | SN751516 |
Texas Instruments |
DC Plasma Display Drivers | |
8 | SN751518 |
Texas Instruments |
DC Plasma Display Drivers | |
9 | SN75153 |
Texas Instruments |
Quad Differential Line Driver | |
10 | SN75155 |
Texas Instruments |
LINE DRIVER/RECEIVER | |
11 | SN75155P |
Texas Instruments |
LINE DRIVER/RECEIVER | |
12 | SN75157 |
Texas Instruments |
DUAL DIFFERENTIAL LINE RECEIVER |