The SN751508 and SN751518 are monolithic integrated circuits designed to drive the data lines of a dc plasma panel display. The SN751518 pin sequence is reversed from the SN751508 for ease in printed-circuit-board layout. Each device consists of two 16-bit shift registers, 32 latches, 32 OR gates, and 32 pnp opencollector output AND gates. Typically, a 32-bi.
stored. When STROBE is high, the latch is masked and a high is placed on the data input of the output AND gates. When STROBE is low and SUSTAIN is high, data from the latches is reflected at the outputs. When low, SUSTAIN forces all outputs to their off state. Drivers can be cascaded via the serial data outputs of the static shift registers. These outputs are not affected by LATCH ENABLE, STROBE, or SUSTAIN.
The SN751508 and the SN751518 are characterized from 0°C to 70°C.
SLDS035
– JANUARY 1987
– REVISED NOVEMBER 1989
SN751508 . . . FT PACKAGE (TOP VIEW)
Q32 1 48 Q31 2 47 Q30 3 46 Q29 4 45.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75150 |
Texas Instruments |
DUAL LINE DRIVER | |
2 | SN751506 |
Texas Instruments |
DC Plasma Display Drivers | |
3 | SN75150P |
Texas Instruments |
DUAL LINE DRIVER | |
4 | SN75151 |
Texas Instruments |
Quad Differential Line Driver | |
5 | SN751516 |
Texas Instruments |
DC Plasma Display Drivers | |
6 | SN751518 |
Texas Instruments |
DC Plasma Display Drivers | |
7 | SN75153 |
Texas Instruments |
Quad Differential Line Driver | |
8 | SN75154 |
Texas Instruments |
QUADRUPLE LINE RECEIVER | |
9 | SN75154N |
Texas Instruments |
QUADRUPLE LINE RECEIVER | |
10 | SN75155 |
Texas Instruments |
LINE DRIVER/RECEIVER | |
11 | SN75155P |
Texas Instruments |
LINE DRIVER/RECEIVER | |
12 | SN75157 |
Texas Instruments |
DUAL DIFFERENTIAL LINE RECEIVER |