The SN74F543 octal transceiver contains two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow. The A outputs are characterized to sink 24 mA while the B outp.
d LEAB low makes the A-to-B latches transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs. The SN74F543 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN74F543 is characterized for operation fr.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74F541 |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
2 | SN74F541N |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
3 | SN74F521 |
Texas Instruments |
8-Bit Identity Comparators | |
4 | SN74F521N |
Texas Instruments |
8-Bit Identity Comparators | |
5 | SN74F573 |
Texas Instruments |
Octal Transparent D-Type Latches | |
6 | SN74F574 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
7 | SN74F574N |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
8 | SN74F00 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATES | |
9 | SN74F02 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATES | |
10 | SN74F04 |
Texas Instruments |
HEX INVERTERS | |
11 | SN74F08 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-AND GATE | |
12 | SN74F10 |
Texas Instruments |
TRIPLE 3-INPUT POSITIVE-NAND GATE |