These 12-bit buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. SN54ABT5403 . . . JT PACKAGE SN74ABT5403 . . . DW PACKAGE (TOP VIEW) Y1 1 Y2 2 Y3 3 Y4 4 Y5 5 Y6 6 GND 7 Y7 8 Y8 9 Y9 10 Y10 11 Y11 12 Y12 13 OE1 14 28 D1.
22 D7 21 VCC 20 D8 19 D9 18 D10 17 D11 16 D12 15 OE2 SN54ABT5403 . . . FK PACKAGE (TOP VIEW) D9 D8 VCC D7 D6 D5 D4 The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all 12 outputs are in the high-impedance state. These devices provide inverted data. The outputs, which are designed to source or sink up to 12 mA, include equivalent 25-Ω series resistors to reduce overshoot and undershoot. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN54ABT540 |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
2 | SN54ABT5402A |
Texas Instruments |
12-BIT LINE/MEMORY DRIVERS | |
3 | SN54ABT541 |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
4 | SN54ABT543A |
Texas Instruments |
OCTAL REGISTERED TRANSCEIVERS | |
5 | SN54ABT533 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
6 | SN54ABT534 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS | |
7 | SN54ABT573 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
8 | SN54ABT574 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS | |
9 | SN54ABT125 |
Texas Instruments |
QUADRUPLE BUS BUFFER GATES | |
10 | SN54ABT126 |
Texas Instruments |
QUADRUPLE BUS BUFFER GATES | |
11 | SN54ABT162244 |
Texas Instruments |
16-BIT BUFFERS/DRIVERS | |
12 | SN54ABT162245 |
Texas Instruments |
16-Bit BUS TRANSCEIVERS |